Collisions
WarpX includes several different models to capture collisional processes including collisions between kinetic particles (Coulomb collisions, DSMC, nuclear fusion) as well as collisions between kinetic particles and a fixed (i.e. non-evolving) background species (MCC, background stopping).
Background Monte Carlo Collisions (MCC)
Several types of collisions between simulation particles and a neutral background gas are supported including elastic scattering, back scattering, charge exchange, excitation collisions and impact ionization.
The so-called null collision strategy is used in order to minimize the computational burden of the MCC module. This strategy is standard in PIC-MCC and a detailed description can be found elsewhere, for example in Birdsall [1]. In short the maximum collision probability is found over a sensible range of energies and is used to pre-select the appropriate number of macroparticles for collision consideration. Only these pre-selected particles are then individually considered for a collision based on their energy and the cross-sections of all the different collisional processes included.
The MCC implementation assumes that the background neutral particles are thermal,
and are moving at non-relativistic velocities in the lab frame. For each
simulation particle considered for a collision, a velocity vector for a neutral
particle is randomly chosen given the user specified neutral temperature. The
particle velocity is then boosted to the stationary frame of the neutral through
a Galilean transformation. The energy of the collision is calculated using the
particle utility function, ParticleUtils::getCollisionEnergy()
, as
\[\begin{split}\begin{aligned} E_{coll} &= \sqrt{(\gamma mc^2 + Mc^2)^2 - (mu)^2} - (mc^2 + Mc^2) \\ &= \frac{2Mmu^2}{M + m + \sqrt{M^2+m^2+2\gamma mM}}\frac{1}{\gamma + 1} \end{aligned}\end{split}\]
where \(u\) is the speed of the particle as tracked in WarpX (i.e. \(u = \gamma v\) with \(v\) the particle speed), while \(m\) and \(M\) are the rest masses of the simulation and background species, respectively. The Lorentz factor is defined in the usual way, \(\gamma \equiv \sqrt{1 + u^2/c^2}\). Note that if \(\gamma\to1\) the above expression reduces to the classical equation \(E_{coll} = \frac{1}{2}\frac{Mm}{M+m} u^2\). The collision cross-sections for all scattering processes are evaluated at the energy as calculated above.
Once a particle is selected for a specific collision process, that process determines how the particle is scattered as outlined below.
Direct Simulation Monte Carlo (DSMC)
The algorithm by which binary collisions are treated is outlined below. The description assumes collisions between different species.
Particles from both species are sorted by grid-cells.
The order of the particles in each cell is shuffled.
Within each cell, particles are paired to form collision partners. Particles of the species with fewer members in a given cell is split in half so that each particle has exactly one partner of the other species.
Each collision pair is considered for a collision using the same logic as in the MCC description above.
Particles that are chosen for collision are scattered according to the selected collision process.
Scattering processes
Charge exchange
This process can occur when an ion and neutral (of the same species) collide and results in the exchange of an electron. The ion velocity is simply replaced with the neutral velocity and vice-versa.
Elastic scattering
The elastic
option uses isotropic scattering, i.e., with a differential
cross section that is independent of angle.
This scattering process as well as the ones below that relate to it, are all
performed in the center-of-momentum (COM) frame. Designating the COM velocity of
the particle as \(\vec{u}_c\) and its labframe velocity as \(\vec{u}_l\),
the transformation from lab frame to COM frame is done with a general Lorentz
boost (see function ParticleUtils::doLorentzTransform()
):
\[\begin{split}\begin{bmatrix} \gamma_c c \\ u_{cx} \\ u_{cy} \\ u_{cz} \end{bmatrix} = \begin{bmatrix} \gamma & -\gamma\beta_x & -\gamma\beta_y & -\gamma\beta_z \\ -\gamma\beta_x & 1+(\gamma-1)\frac{\beta_x^2}{\beta^2} & (\gamma-1)\frac{\beta_x\beta_y}{\beta^2} & (\gamma-1)\frac{\beta_x\beta_z}{\beta^2} \\ -\gamma\beta_y & (\gamma-1)\frac{\beta_x\beta_y}{\beta^2} & 1 +(\gamma-1)\frac{\beta_y^2}{\beta^2} & (\gamma-1)\frac{\beta_y\beta_z}{\beta^2} \\ -\gamma\beta_z & (\gamma-1)\frac{\beta_x\beta_z}{\beta^2} & (\gamma-1)\frac{\beta_y\beta_z}{\beta^2} & 1+(\gamma-1)\frac{\beta_z^2}{\beta^2} \\ \end{bmatrix} \begin{bmatrix} \gamma_l c \\ u_{lx} \\ u_{ly} \\ u_{lz} \end{bmatrix}\end{split}\]
where \(\gamma\) is the Lorentz factor of the relative speed between the lab frame and the COM frame, \(\beta_i = v^{COM}_i/c\) is the i’th component of the relative velocity between the lab frame and the COM frame with
\[\vec{v}^{COM} = \frac{m \vec{u_c}}{\gamma_u m + M}\]
The particle velocity in the COM frame is then isotropically scattered using the function ParticleUtils::RandomizeVelocity()
. After the direction of the velocity vector has been appropriately changed, it is transformed back to the lab frame with the reversed Lorentz transform as was done above followed by the reverse Galilean transformation using the starting neutral velocity.
Back scattering
The process is the same as for elastic scattering above expect the scattering angle is fixed at \(\pi\), meaning the particle velocity in the COM frame is updated to \(-\vec{u}_c\).
Excitation
The process is also the same as for elastic scattering except the excitation energy cost is subtracted from the particle energy. This is done by reducing the velocity before a scattering angle is chosen.
Benchmarks
See the MCC example for a benchmark of the MCC implementation against literature results.
Particle cooling due to elastic collisions
It is straight forward to determine the energy a projectile loses during an elastic collision with another body, as a function of scattering angle, through energy and momentum conservation. See for example Lim [2] for a derivation. The result is that given a projectile with mass \(m\), a target with mass \(M\), a scattering angle \(\theta\), and collision energy \(E\), the post collision energy of the projectile is given by
\[\begin{split}\begin{aligned} E_{final} = E - &[(E + mc^2)\sin^2\theta + Mc^2 - \cos(\theta)\sqrt{M^2c^4 - m^2c^4\sin^2\theta}] \\ &\times \frac{E(E+2mc^2)}{(E+mc^2+Mc^2)^2 - E(E+2mc^2)\cos^2\theta} \end{aligned}\end{split}\]
The impact of incorporating relativistic effects in the MCC routine can be seen in the plots below where high energy collisions are considered with both a classical and relativistic implementation of MCC. It is observed that the classical version of MCC reproduces the classical limit of the above equation but especially for ions, this result differs substantially from the fully relativistic result.
C. K. Birdsall. Particle-in-cell charged-particle simulations, plus Monte Carlo collisions with neutral atoms, PIC-MCC. IEEE Transactions on Plasma Science, 19(2):65–85, 1991. doi:10.1109/27.106800.
C.-H. Lim. The interaction of energetic charged particles with gas and boundaries in the particle simulation of plasmas. 2007. URL: https://search.library.berkeley.edu/permalink/01UCS_BER/s4lks2/cdi_proquest_miscellaneous_35689087.